DELL POWERVAULT 132T MANUAL PDF
Dell PowerVault T Pdf User Manuals. View online or download Dell PowerVault T Upgrade Manual. View and Download Dell PowerVault T LTO handbook online. Dell PowerVault DLT, VS, and SDLT Media Handbook Version PowerVault T LTO. Dell PowerVault T LTO Pdf User Manuals. View online or download Dell PowerVault T LTO Manual.
|Published (Last):||14 May 2011|
|PDF File Size:||10.26 Mb|
|ePub File Size:||15.20 Mb|
|Price:||Free* [*Free Regsitration Required]|
Fan Failure Call Service. Page 6 Primary Figure Check that both reel locks are visible.
The scanned barcode is incorrect for your current configuration. If the problem still persists, contact Technical Support, you may need to exchange the drive.
Ship cartridges in drive.
The RMU has reported an error to the library. The picker has reported a move failure, which may be caused by an obstruction of the picker, such as partially extended tapes into the picker path, an ejected tape from a drive, or a tape within the picker partially extending out of delo picker.
Try to clear the obstruction. A damaged tape leader on the media has caused a buckling failure or a dropped leader inside the drive. Note that the plastic hooks are bent inward and not resting on the cartridge wall. See Figure to identify bent-in leader buckles.
To print the manual completely, please, download it. Check barcode scanner configuration.
Dell PowerVault 132T LTO Manuals
Bad Barcode Check Tape X. Make sure that the tape belongs in the location it was placed. Communication to a drive is not working, the drive is not initializing, or the drive is reporting a problem. Sled Missing Check Sled. If the lights on the front of the drive continue to flash after the tape has been removed, contact Technical Support.
Dell PowerVault 132T LTO Handbook
PS Failure Call Service. Exhausted Cleaning Media If so, try another cleaning tape. Depending on the drive model, if the light does not go off, there may be a hardware fault in the drive or expired media is being used. Comments to this Manuals Your Name.
Dell PowerVault T LTO/SDLT (Tape Library) User Manual | Page 88 / 89
This manual also for: Tape Recovered to Cell X. Typically this means a tape is still partially in the picker.
Drive Error Check Drive. The library firmware was able to communicate with the RMU, but did not detect any communication for more pkwervault 10 minutes. Remove the suspect tape. Dell powervault t sdlt autoloader user’s guide 40 pages. Remove the cartridge from the drive by pressing and holding the eject button on the drive for 10 seconds.
Page 20 Ship cartridges in drive.
Dell PowerVault T LTO/SDLT (Tape Library) User Manual | Page 49 / 89 | Original mode
E3h, E4h, E5h, and E6h. Always poweervault where media was originally used and formatted. An error has been sent to the library from the SNC. Got it, continue to print. Verify operation using a small flat-blade screwdriver.
This is most likely the result of a missing or unreadable barcode or a barcode length that does not match the mode you have configured such as Default, Media ID, or Extended. Discard the suspect cartridge. A library power poaervault failed or is not operating within specified ranges. The firmware detects that the code configuration does not match the hardware configuration. Reproduction in any manner whatsoever without the written permission of Dell Inc.
Page 18 See Figure to identify bent-in leader buckles. Remove the tape from the picker.
The configured drive at slot X is not supported in the library.